On November 18, draft revisions to the "Government Procurement Requirement Standards for Product Packaging" and "Government Procurement Requirement Standards for Express Delivery Packaging" were released for public comment.
To further leverage the exemplary and guiding role of government procurement and encourage the adoption of green packaging across society-in accordance with the "Three-Year Action Plan (2024–2026) for Rectifying Market Order, Building a Regulatory System, and Promoting Industrial Development in the Field of Government Procurement" (issued by the General Office of the State Council, [2024] No. 33)-the Ministry of Finance, in collaboration with the Ministry of Ecology and Environment and the State Post Bureau, has drafted these revised standards.
The draft standards establish specific requirements for biodegradable packaging and the use of bio-based plastics in plastic packaging, as detailed below:
Government Procurement Requirement Standards for Product Packaging (Draft for Comment)
In these standards, "product packaging" refers to the specific packaging of goods supplied to government procurement entities, primarily encompassing packaging made from plastic, paper, textile fibers, wood, or composite materials. Packaging for medical devices, pharmaceuticals, food, cosmetics, and hygiene products is subject to separate national regulations and does not fall under the scope of these standards.
3. Basic Requirements
3.1 The production process and product quality of all packaging must comply with relevant laws, regulations, and mandatory standards.
3.2 Packaging must utilize materials that are recyclable, renewable, or biodegradable; excessive packaging is prohibited.
3.3 Packaging shall not exceed three layers, and the void ratio (the proportion of empty space) shall not exceed 40%. Note: The void ratio is to be calculated in accordance with the GB/T 31268 standard.
3.4 Packaging should, as far as possible, consist of a single type of material. If different materials are used to meet functional requirements, they must be easily separable or recyclable. 3.5 The production of product packaging shall utilize water-based inks, water-based adhesives, and water-based cleaning agents.
4. Requirements for Product Packaging
4.1 Product packaging based on plastic materials (hereinafter referred to as "plastic packaging")
4.1.1 For plastic packaging, the biodegradation rate of any biodegradable plastic components shall be no less than 90%. Biodegradable plastic packaging shall comply with the degradation performance requirements specified in GB/T 41010.
4.1.2 Non-biodegradable plastic packaging shall not be manufactured using thermosetting plastics or expanded polystyrene (EPS).
4.1.3 Plastic packaging shall contain at least 5% post-consumer recycled plastic or bio-based plastic. The use of polyvinylidene chloride (PVDC) as a recyclable material is prohibited. For the purposes of the "Government Procurement Requirement Standards for Express Delivery Packaging (2026 Edition)," express delivery packaging refers to materials used for express shipments, including envelopes, adhesive tapes, shipping labels, packaging bags/boxes, cushioning materials, bulk shipping bags (FIBCs), and reusable shipping containers.
3. Basic Requirements
3.1 The production process and product quality of express delivery packaging shall comply with all applicable laws, regulations, and mandatory standards.
3.2 If product packaging is used directly as express delivery packaging, it must meet the requirements set forth in the "Government Procurement Requirement Standards for Product Packaging (2026 Edition)."
3.3 Express delivery packaging shall be made from recyclable, renewable, or biodegradable materials; excessive packaging is prohibited.
3.4 Express delivery packaging should, to the extent possible, be composed of a single type of material. If multiple materials are used due to functional requirements, they must be easily separable or recyclable.
3.5 Any wood-based raw materials used in express delivery packaging must be sourced from sustainably managed forests.
3.6 The production of express delivery packaging shall utilize water-based inks, water-based adhesives, and water-based cleaning agents. 4. Requirements for Express Delivery Packaging
4.1 Plastic-based express delivery packaging (hereinafter referred to as "plastic express packaging") primarily includes packaging bags, fillers, and adhesive tapes made from resins.
4.1.1 The content of di(2-ethylhexyl) phthalate (DEHP) in plastic express packaging shall comply with the provisions of GB 43352.
4.1.2 The biodegradation rate of plastic express packaging shall be no less than 90%. The use of biodegradable raw materials not derived from food crops (such as bamboo powder) is encouraged. Biodegradable plastic express packaging shall meet the degradation performance requirements specified in GB/T 41010.
4.1.3 Non-biodegradable plastic express packaging shall not be manufactured using thermosetting plastics or expanded polystyrene (EPS).
4.1.4 The combined content of post-consumer recycled plastics and bio-based plastics in plastic express packaging shall be no less than 30%. The use of polyvinylidene chloride (PVDC) as a recyclable material is prohibited.
4.1.5 Plastic express packaging shall be made from a single type of material; the use of polyvinyl chloride (PVC) as a raw material is prohibited.





